WS0412

 

WRAP SEAL QUICK REPAIR KIT FOR PIPE LEAKS

Features:

• Repairs leak in 30 minutes
• Applicable to pipes up to 18” (457 mm) diameter
• Applicable on any metal or non-metal pipes
• Repairs T-joint, elbow joint, valve thread, valve body
• Withstand pressure up to 400 psi (28 kg/cm2)
• Withstand temperature up to 200 °C (392 °F)
• Safe for drinking water and resistant to most chemicals
• Reinforce and strengthen pipe after repair
• Permanent repair and extend service life of pipes

Application:

• Pipe repairs:
• offline repairs
• sealing joints
• hazardous material spill control
• reinforce thinning walls
• Abrasion protection
• Structural reinforcement
• Repairs in hard to reach areas
• Underwater repairs

Package:

• 1 roll of Wrap Seal® Fiberglass Tape
• [WS0205] 2” x 5’ (50 mm x 1.5 m)
• [WS0206] 2” x 6’ (50 mm x 1.8 m)
• [WS0212] 2” x 12’ (50 mm x 3.6 m)
• [WS0309] 3” x 9’ (75 mm x 2.7 m)
• [WS0412] 4” x 12’ (100 mm x 3.6 m)
• [WS0420] 4” x 20’ (100 mm x 6.0 m)
• [WS0430] 4” x 30’ (100 mm x 9.0 m)
• [WS0620] 6” x 20’ (150 mm x 6.0 m)
• [WS0630] 6” x 30’ (150 mm x 9.0 m)
• 1 unit of Seal Stic® Quick Cure Epoxy
• 1 pair of latex gloves
• Operating instruction

Technical data:

Pressure tested	:	1/2″ (15 mm) steel pipe with 1/8″ (3 mm) hole when repaired with Wrap Seal withstands 4000 psi (281 kg/cm2)
		1/2″ (15 mm) steel pipe with 1/2″ (13 mm) hole when repaired with Wrap Seal withstands 600 psi (42 kg/cm2)
Tensile strength	:	3920 psi (276 kg/cm2)
Bond strength	:	230 psi (16 kg/cm2)
Tensile elongation	:	1.2 % ± 0.7 %
Compressive strength	:	13750 ± 530 psi (967 ± 37 kg/cm2)
Yield strength	:	2260 psi (159 kg/cm2)
Cured hardness	:	82 Shore D
Pipe size	Number of rolls / size required
	50 psi (4 kg/cm2) 10 plys	150 psi (11 kg/cm2) 15 plys	400 psi (28 kg/cm2) 20 plys
½” (15mm)	1 A	1 A	1 A
¾” (20mm)	1 A	1 A	1 A
1″ (25mm)	1 A	1 A	2 A
1¼” (32mm)	1 A	2 A	3 A
1½” (40mm)	2 A	2 A	1 B
2″ (50mm)	1 B	1 B	1 B
2½” (65mm)	1 B	1 B	2 C
3″ (80mm)	1 B	2 C	2 C
4″ (100mm)	1 B	2 C	3 C

Pipe size	Number of rolls / size required
	50 psi (4 kg/cm2) 10 plys		150 psi (11 kg/cm2) 15 plys		400 psi (28 kg/cm2) 20 plys
5″ (125mm)	2 C		2 C		3 C
6″ (150mm)	2 C		2 C		4 C
8″ (200mm)	2 C		3 C		5 C
10″ (250mm)	3 C		4 C		6 C
12″ (300mm)	4 C		5 C		8 C
14″ (350mm)	4 C		6 C		8 C
16″ (400mm)	5 C		7 C		9 C
18″ (450mm)	5 C		8 C		9 C
> 18″ (450mm)	Contact SealXpert for recommendations
Roll size	A (2″ x 5′) (50mm x 1.2m)	A (2″ x 6′) (50mm x 1.8m)	B (2″ x 12′) (50mm x 3.6m)	B (3″ x 9′) (75mm x 2.7m)		C (4″ x 12′) (100mm x 3.6m)

OPERATING TEMPERATURE:

• Continuous – From -29 °C (-20 °F) up to 200 °C (392 °F)
• Intermittent – From 200 °C (392 °F) up to 320 °C (570 °F)

OPERATING PRESSURE:

• Recommended for pressure up to 400 psi (28 kg/cm2)
• (Results vary depending on pipe size, type of pipe, hole size, pipe content and method of application)

APPLICABLE INDUSTRIES:

WRAP SEAL OFFLINE LEAK REPAIR PROCEDURE:

HOW TO REPAIR PIPE LEAKS WITH WRAP SEAL QUICK REPAIR KIT FOR PIPE LEAKS

Hubungi Kami:

Agent Seal-expert product in Indonesia

*JAKARTA: Jalan Industri KAV 9-11, Komplek GK Blok SB No.3

Kemayoran JAKARTA PUSAT; 10710; 

Telp: 021-62302799; HP/WA: 081270868021

email: triasnathomichemindo.pt@gmail.com

*BATAM: Komplek Ruko Batavia, Block. E1, no.21 Batu Aji - Batam

Telpon:0778-4091253; Hp/WA: 0812-7086-8021

Email: tokokimiabatam@gmail.com; Website: www.sealerproduct.com

#bahankimia, #specialistpipe, #tokokimia, #leakrepairkit, #Sealerproduct, #WrapSealQuick,  #pipeleak, #piperepair, #pipereinforcement, #pipecorrsion

Related product you might see: