OPEN GEAR & WIRE ROPE GREASE

 

Wire Rope Grease

OPEN GEAR AND WIRE ROPE GREASE OWPG25R. 

Introduction

SealXpert® Open Gear and Wire Rope Grease is a Bentone based open gear lubricant which will not thin out in use. It is completely water resistant, unaffected by aqueous solutions of acids and alkalis, and contains oxidation and rust inhibitors as well as adhesion and EP additives. An excellent lubricant for wet or adverse weather conditions, and extremes of temperature.

Typical Applications

  1. Specially designed for use in marine environment, widely used for sea vessels, winches & wire ropes, cargo & warping winch open gear teeth and cranes.
  2. Used for gear drives and open gears, sliding bearings operating at low speeds and high temperatures, such as bearings in drying systems and calendaring machines used in various industrial processes.
  3. Suitable for the lubrication of wire ropes, chains, control cables and linkages and heavily loaded plain bearings.

Direction for Use

  • Clean the contact areas. As is usual with lubricating greases, apply by means of a brush, spatula, grease-gun or automatic lubrication device.
  • For use on Chains with hollow pins: The hollow pins should be completely packed with grease. Re-lubricate through grease nipples using a grease gun.
  • For use on Gears: The tooth profiles of new gears should be treated with SealXpert GN Paste and run without load for a short time to generate a basic solid lubricating film.
  • The gears should then be lubricated with SealXpert Open Gear & Wire Rope Grease in accordance with the gear manufacturer's instructions.
  • Safety and Handling Consideration
  • This product may irritate the skin or eyes. Wear proper protective equipment.
  • Do not store with oxidizing agents. 
  • Keep away from heat and sources of ignition.
  • Keep away from children.
  • Use with adequate ventilation.
  • In case of contact with skin, wash with water and soap.
  • In case of contact with eyes, rinse with clean water immediately. Get medical attention if irritation develops and persists.
  • More details, please refer to MSDS of this product


Recommended Storage Stored in a cool and dry location in unopened containers at 8~28℃. When stored in a cool and dark place in the original unopened containers, this product has a usable life of 60 months from the date of production.

Specification

Typical Properties

Data

Base

Bentone

Consistency N.G.L.I

No.3

Worked penetration at 25°C (77°F)

265/295

Drop point (I.P.31)

None (infusible)

Kinematic Viscosity: - @40°C

520 cSt

Kinematic Viscosity: -- @100°C

35 cSt

Water resistance

Complete

Continuous working temperature

-20°C to 200°C/ -4°F to 392°F)

Closed flash point of base oil

232°C (450°F)


Disclaimer: The information contained herein is considered accurate. However, no warranty is expressed or implied regarding the accuracy of the data, the results to be obtained by the use thereof, or that any such use will not infringe any patent. Before using, user shall determine the suitability of the product for the intended use and user assumes all risk and liability whatsoever in connection therewith.

PACKAGING

  1. OWPG2.5R 2.5 Kg
  2. OWPG25R 15Kg


DATA SHEET


Related product you might see:

Share this product :

Post a Comment

Note: Only a member of this blog may post a comment.

 
Support : SEAL EXPERT INDONESIA | PT. TRIAS NATHOMI CHEMINDO | Indonesia
Copyright © 2019. Sealerproduct - All Rights Reserved
Web Design by PT.HUTA DIGITAL SOLUSI
UA-102567637-1